![[[smallImgAlt]]](/uploads/202131225/ss-micron-filter-housing01158597651.jpg)
Feature:
Cartridge filter is a filter system with high precision.
It consists of SS micron filter housing and cartridge elements, mainly used in pretreatment.
It can be widely used in electronic industry, sewage treatment,beverage, foods, pure water treatment, also it can acts as home water purification equipment.
Type | Material | Cartridge size | Cartridge pcs |
SS Micron Filter Housing | SS304 | 10”20”30”40” | 5 Element |
40” | 7/10/12/15/20 Element |
Specification:
SS Micron Filter Housing with pp cotton filter.
Removal of particulate matter such as silt, rust, etc., with a filtration accuracy of 1 micron.
With microporous folded filter element.
The filtration accuracy can reach 0.1UM, which can remove bacteria and viruses with large particles in the water body, and the filtration accuracy is very high.
Installation instructions:
1. Thoroughly clean Filter Housing.
2. The inlet and outlet of the net shell are connected with the pipeline of the filter system. Pay attention to the direction when connecting to ensure that the filter element is in the state of water inlet on the outside and water outlet on the inside.
3. Open the plastic bag at the opening end of the filter element and check whether the O-ring is intact and in place.
4. Use a suitable wetting agent (such as water) to wet the O-ring and the socket of the filter element seat.
5. Hold the end of the filter element close to the O-ring, and vertically insert the filter element socket into the socket of the filter element holder.
6. After inserting all the filter elements, remove the filter element packaging bag, buckle the pressure plate and fix it, and then install the metal cover.
7. Open the air release valve on the top of the housing.
8. Slightly open the inlet valve to allow the liquid to enter the shell until the liquid escapes from the bleed valve on the top of the shell, then close the bleed valve.
9. Slowly adjust and open the downstream outlet valve until it is fully opened.
10. Slowly adjust and open the inlet valve until the pressure drop between the upstream and downstream of the filter is 0.02Mpa (determine the initial pressure drop under the flow rate).
Contact：
Email: sara@water-ts.com
Hot Tags: ss micron filter housing, China, suppliers, manufacturers, factory, customized, buy, price, quotation, bulk, for sale, in stock
