Generally, professional technicians are required to clean the reverse osmosis system. Can customers clean it by themselves? If the reverse osmosis system needs to be cleaned, you should contact a professional manufacturer to complete it. The following conditions are the prerequisites for chemical cleaning, and cleaning can be performed if they occur. The prerequisite for chemical cleaning: when the water output of the system is reduced by 5-10% compared to the initial period or the last cleaning operation. When the desalination rate of the system is 2.5-5% lower than the initial period or the last cleaning operation. When the pressure difference of each section of the system is 1-2 times that of the initial period or after the last cleaning operation. The system needs to be protected with a protective solution when it is out of service for a long time.
Remarks: The water production rate and desalination rate are affected by the water temperature, so the result of the test should be the result obtained under the same water temperature.
