Spiral Wound UF Membrane

Model: SEG-UF-4040

Spiral wound ultra-moving membrane element for electrophoretic coating

Product description

Spiral wound UF Membrane separation layer: polyvinylidene fluoride

Support layer:Polyester

Permeate pipe: UPVC

Baffle: ABS

Elastomeric seal: ethylene propylene rubber

Construction: Rolled fiberglass exterior

Specifications

Model	Diameter(in/mm)	Length(in/mm)	Effective membrane area(ft²,M²)
SEG-UF-4040	3.9/99	40/1016	75/7.0

Interchangeable Product Reference: PARKER EP4040-BSF1-H4; SYNDER V62-4040H: AMT EDUF-4040-HE: AMF EDUF-4040-HE For special applications, please consult our technical staff.

Operating conditions

Recommended Inlet Pressure: Maximum Inlet Pressure: 65 psi (4.4 bar) 44-60 psi (3.0-4.1 bar) Recommended outlet pressure: 15-40psi(1.0-2.7bar)

Maximum operating temperature: 122°F (50°C)

PH value range (continuous operation): 2.0-10.0

PH value range (short-time cleaning): 2.0-11.5@50℃,

30min Feed volume: 20-24gpm (76-91lpm)

Design Parameters Yield: 0.7-1.0 gpm (2.6-3.8lpm)

Advantages:

Recycle the electrophoretic paint washed off the surface of the workpiece, and the recovered electrophoretic paint Reuse can save 30% of the purchase cost of electrophoretic paint

Avoid environmental pollution due to the discharge of varnished wastewater

The produced ultrafiltration water can be used as rinse water for electrophoresis tank workpieces

By properly discharging the ultrafiltratewith spiral wound uf membrane, remove the electrophoretic paint brought into the production process Various ions in the tank stabilize the electrophoretic paint working solution.

Contact:

Email:sara@water-ts.com

Hot Tags: spiral wound uf membrane, China, suppliers, manufacturers, factory, customized, buy, price, quotation, bulk, for sale, in stock